Should quadcopter enthusiast describe their rapport with the little machines, words for example 'addiction' almost always seem to come to the surface that. Combine that with the alluring consider of 3D printing's personalization on top of that customization and you have a perfect storm to work with obsessive tinkering.
Jim Spencer, insider of MakerHive, found himself wishing can move to a radio controlled quadcopter that would venture beyond those he could find in the marketplace:
"I've always loved flying RADIO CONTROLLED toys, so when they became very affordable, I bought my first quadcopter. 'Once you prop, you can't stop' so I bought another micro. Naturally , flying little quads just causes you to want to have a big one, one that certainly is capable of carrying a GoPro along with of FPV racing and achieving serious flying. I'd already come across several store bought and pre-built creates, and while they worked, they close to didn't thrill me. Since I am addicted to making and 3D prints, designing and building my own is the only way to proceed. "
Spencer was interested in obtaining the maximum vibration solitude possible as well as combining carbon fiber iPhone case wires with 3D printed parts of his personal design. While doing this, he was throughout interested in keeping the modularity and adjustability of parts in mind so that it would be simple for parts to be added and detached or remade as required simply by anybody wishing to use his format.
The carbon fiber phone case components were made anywhere from inexpensive arrows purchased at the physical exercise store and all of the plastic parts all the 3D printed. He used O-Rings to reduce the transference of erschütterung on all parts where the plastic bords with the carbon fiber. For the controller finish, he was inspired by the Omni-Mac on top of that designed his own version using piping as the slot for the controller on top of that ensuring isolation from the frame simply by using silicone.
Each part was assessed and redesigned multiple times as he was successful to create the optimal configuration and manufacturing line for his quadcopter. Having worked therefore , closely to create every part of the finished product leaves the designer with a true reason of pride and ownership in your design, unattainable by those who expense ready made kits:
"The most notable format aspect that I'm proud of is actually the silicone isolators are laid out 90 degrees away from each other, particularly the sides of a pyramid or the XYZ axes in 3D space. Is so the mount can isolate erschütterung in all directions equally. I designed on top of that printed my own molds for the erschütterung isolators and made those pieces professionally. "
Using industry standard scale means that parts can be interchanged, scaled up, or added on on the grounds that desired by any individual user. Since the best spirit of the open source flow, Spencer has gone out of his means to provide the fullest detail possible lady both his process and the solution through Revolver.
It should come as not surprising that despite the successful flight investigate, Spencer still considers his format 'semi-final' rather than finished. I've actually met a maker who could not follow an explanation of their creation acquiring laundry list of desired modifications. That is what keeps us all coming back further.
What do you think of Spencer's creation? Let us know in your 3D Printed Carbon Fiber Quadcopter rassemblement thread on 3DPB. com.
No comments:
Post a Comment